Home
Search Products
Products Center
Technical Services
News&Events
SUPLET?
Contact US

Soldering BMP

BMP Soldering


For through-hole modules of BMP, the pins should exceed the PCB by 1 to 2mm.

For wave soldering, it is necessary to press the module with a test jig to avoid a gap exceeding 0.2mm between the module and the application board.

image.png

The soldering temperature of the BMP pin should not exceed 270 ℃ and the soldering time should not exceed 10 seconds.

When the soldered BMP is disassembled from PCB, the disassembly method should be strictly controlled. If using the disassembled BMP again, to confirm that the BMP is in a normal state, first. If in doubt, contact SUPLET Technical Support Engineer.


COPYRIGHT 2019 ALL RIGHTS RESERVED SHENZHEN SUPLET CO., LTD.  |  京ICP備05064032號-1   POWERBY:kbyun.com
推特爆乳福利姬在线播放,我征服了好友麻麻美妇小说,手机播放国自产拍在,极品混血美女大战黑人黑白配